Matter at the atomic scale: bonds, reactions and process engineering: Key terms, quiz and sources
All courses / Understanding Engineering / Module 10: Matter at the atomic scale: bonds, reactions and process engineering Wrap-upMatter at the atomic scale: bonds, reactions and process engineering: review
Key terms
- Mole
- The amount of substance that contains 6.02 x 10^23 particles; its mass in grams equals the atomic or molecular mass.
- Kilomole (kmol)
- One thousand moles, the engineer's counting unit; its mass in kilograms equals the molecular mass.
- Metallic bond
- The bond in which outer electrons move freely through a lattice of positive ions, giving conduction and ductility.
- Ionic bond
- The attraction between positive and negative ions formed by transfer of electrons, as in salt and alumina.
- Covalent bond
- A bond formed by atoms sharing electron pairs along fixed directions, as in diamond, glass and the backbone of a polymer.
- Dislocation
- A line defect in a crystal whose movement lets planes of atoms slip, so that a metal can bend instead of breaking.
- Polymer
- A material made of very long molecules, built by joining many small monomers end to end.
- Thermoplastic and thermoset
- A thermoplastic softens on heating because its chains can slide; a thermoset is cross-linked and chars instead of melting.
- Activation energy
- The energy barrier that colliding molecules must climb before they can react; it controls how fast the rate changes with temperature.
- Catalyst
- A material that speeds a reaction by giving it a lower barrier, without being used up and without shifting the equilibrium.
- Chemical equilibrium
- The state in which a reversible reaction proceeds forwards and backwards at equal rates, so composition stops changing.
- Conversion per pass
- The share of the feed that reacts in one trip through the reactor.
- Recycle
- Returning unreacted feed from the separator to the reactor inlet, so that little is lost despite low conversion per pass.
- Mass balance
- An accounting of every stream into and out of a defined boundary, which must close at steady state.
- Unit operation
- A basic repeatable plant step, such as reaction, distillation, filtration or heat exchange, described by the same rules in any industry.
- Reflux
- Condensed overhead liquid returned to a distillation column to improve purity, at the price of more heat.
- Clinker
- The hard nodules made by heating limestone and clay in a kiln, ground with gypsum to make Portland cement.
- Runaway reaction
- A reaction that heats itself faster than its cooling can remove heat, so temperature and rate climb together.
Try it in the table
- Open 'Haber-Bosch ammonia synthesis' and 'Nitrogen (ammonia)'. Take a plant of 1 million tonnes a year and repeat Estimate 4: hydrogen in tonnes per hour (at 8,000 hours a year), and the gas entering the reactor at 25 per cent conversion per pass.
- Open 'Portland cement' and 'Cement'. For a 1 million tonne a year kiln, redo Estimate 10 with a clinker factor of 0.70 and 2.9 GJ per tonne of clinker, and say which of the two changes saves more carbon dioxide.
- Open 'Distillation' and 'Bioethanol'. Repeat Estimate 7 with a reflux ratio of 5 instead of 3. How much more steam does the column need, and what does it buy in purity?
- Open 'Blast furnace and cast iron', 'Direct reduction of iron' and 'Hydrogen direct reduction (green steel)'. For 1 million tonnes a year of sponge iron, use Estimate 11 to find the hydrogen in tonnes and the electricity in TWh at 52 kWh per kg.
- Open 'Catalytic converter'. Note which metals are used and at what exhaust temperature it starts to work. Use the Estimate 3 method to find how much an activation energy cut of 30 kJ per mol speeds a reaction at 600 K.
- Open 'Dislocations in crystals' and 'Steel reinforcing bar'. List two things a rebar maker does to block dislocations, and say what each costs in ductility.
Final quiz
A plant must make 1 tonne of ammonia (N2 + 3 H2 -> 2 NH3). About how much hydrogen does that need?
One tonne is 58.7 kmol of NH3, which needs 88.1 kmol of H2 at 2.016 kg per kmol, about 178 kg. The other 822 kg of the tonne is nitrogen.Why does a ceramic tile snap when bent, while a steel strip bends?
Dislocations let metal planes slip a row at a time. Ionic and covalent crystals cannot slip without repulsion or bond breaking, so flaws grow into cracks.A reaction has an activation energy of 50 kJ per mol. Moving it from 25 degrees C to 35 degrees C changes its rate by about:
The rate ratio is exp[(Ea / R) x (1/298 - 1/308)] = exp(0.655), about 1.9, the familiar 'doubling for 10 K'.Adding a catalyst to a reversible reaction at equilibrium will:
A catalyst lowers the barrier for the forward and reverse paths equally, so it changes only the speed.An ammonia converter makes 25 per cent conversion per pass. For each 1 kmol of fresh gas, the recycle loop must carry:
The reactor receives fresh feed divided by 0.25, which is 4 kmol, so 3 kmol come back round as recycle.A sugar mill crushes 5,000 t of cane a day and recovers 10.4 per cent as sugar. About how much bagasse does it also produce, using the 100 t balance?
The balance gives 30 t of bagasse per 100 t of cane, so 5,000 t gives 1,500 t. The 3,900 t figure is the water boiled off.Cement clinker is 65 per cent CaO. How much CO2 does the limestone alone release per tonne of clinker?
0.65 t of CaO x 44/56 = 0.51 t of CO2. The 1.16 t is the weight of limestone, and 0.29 t is the coal's share at the Indian average kiln heat.Why can a reaction that is safe in a 1-litre flask run away in a 10 m3 tank?
Surface to volume fell from 48 to 2 per metre, so each square metre of wall carries 24 times more heat; and the heat made climbs exponentially with temperature while cooling rises only in proportion.Sources for this module
- Kosky et al., Exploring Engineering (Academic Press, 2013) · ch. 6, 'Chemical Engineering' (atoms, moles, balances, unit operations, distillation); ch. 11, 'Materials Engineering' (structure, bonds, strength, polymers). Used as a source of ideas only; all text, examples and numbers here are the author's own.
- Bloomfield, How Things Work (Wiley, 2015) · ch. 7, 'Heat and Phase Transitions' (chemical bonds, phase change, latent heat). Used as a source of ideas only.
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. I (Caltech online edition) · further reading (the site could not be fetched in this working environment, so the physics was checked against standard values): ch. 1, 'Atoms in Motion', https://www.feynmanlectures.caltech.edu/I_01.html; ch. 40, 'The Principles of Statistical Mechanics', https://www.feynmanlectures.caltech.edu/I_40.html
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. II (Caltech online edition) · further reading: ch. 30, 'The Internal Geometry of Crystals', https://www.feynmanlectures.caltech.edu/II_30.html
- Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. III (Caltech online edition) · further reading: ch. 10, 'Other Two-State Systems' (the chemical bond), https://www.feynmanlectures.caltech.edu/III_10.html
- International Energy Agency, Ammonia Technology Roadmap (2021, read November 2026) · executive summary: about 8.6 EJ used; over 70 per cent from natural gas; best-practice 28 GJ per tonne (gas) and 36 GJ (coal); world average about 41 GJ; about 2.4 t CO2 per tonne; 450 Mt CO2; https://www.iea.org/reports/ammonia-technology-roadmap/executive-summary
- International Energy Agency, Global Hydrogen Review 2025, Assumptions annex (read November 2026) · water electrolysis efficiency 63 per cent (LHV) in 2024; https://iea.blob.core.windows.net/assets/15673ab3-a86a-4434-bff4-490bb42d3563/GlobalHydrogenReview2025AssumptionsAnnex.pdf
- AIChE, 'Introduction to Ammonia Production', Chemical Engineering Progress (read November 2026) · converter exit ammonia concentration raised from about 12 to 19 to 21 per cent; synthesis loops at 150 to 200 bar; https://aiche.org/redirect/cep-highlight-introduction-ammonia-production
- World Steel Association, World Steel in Figures 2025 (read November 2026) · 2023 CO2 intensity 1.92 t per t of crude steel (BF-BOF 2.32, DRI-EAF 1.43, scrap EAF 0.70); India 2024 crude steel 149.4 Mt, 58.8 per cent electric routes; https://worldsteel.org/wp-content/uploads/World-Steel-in-Figures-2025.pdf
- Global Cement and Concrete Association India, Roadmap executive summary (2025, read November 2026) · India 680 kg CO2 per tonne of cement in 2020; clinker factor 0.75; average kiln heat 731 kcal per kg of clinker in 2020; 334 Mt in 2019-20; https://gccassociation.org/wp-content/uploads/2025/03/Excutive-summary-Roadmap.pdf
- Business Today, 'India's sugar production reaches 257.44 lakh tonnes as of May 15' (16 May 2025, read November 2026), citing ISMA · 257.44 lakh tonnes to 15 May 2025, with ISMA expecting 261 to 262 lakh tonnes for the full 2024-25 season (ISMA's own site could not be reached); https://www.businesstoday.in/latest/economy/story/indias-sugar-production-reaches-25744-lakh-tonnes-as-of-may-15-positive-outlook-for-2025-26-476600-2025-05-16
- Standard thermochemical and materials reference data (average bond energies, heats of reaction and vaporisation, melting points, polymer data) · rounded values from general chemistry and engineering handbooks; no single table is reproduced. Typical-practice figures (sugar-mill steam use and evaporator economy, reactor conversion per pass, desalination energy) are marked as assumed in the text; kiln heat and electrolyser energy are sourced.