Material Insights · Understanding the Material World

Matter at the atomic scale: bonds, reactions and process engineering: Atoms and bonds: why materials behave as they do

All courses / Understanding Engineering / Module 10: Matter at the atomic scale: bonds, reactions and process engineering Part 1 of 5

Atoms and bonds: why materials behave as they do

Every material is atoms held together by electric forces, and the way they are held decides whether a thing bends, shatters, melts at a kitchen temperature or in a furnace. This part counts atoms, sorts bonds into four kinds, explains why iron bends while a tile cracks, and ends with plastics as very long chains.

1.1 Counting by the mole turns grams into atoms, and a cubic centimetre of iron holds about 8.5 x 10^22 of them

An iron nail feels solid and smooth, yet it is a crowd of atoms, each about a quarter of a nanometre from its neighbours. Chemistry deals with atoms joining in fixed ratios, so an engineer needs to count them from a weighing scale. The tool is the mole. A mole is 6.02 x 10^23 particles, a number picked so that a mole of anything weighs, in grams, its relative atomic or molecular mass: about 12 g for carbon, 56 g for iron and 17 g for ammonia. Plant engineers think in tonnes, so they count in kilomoles (kmol) of 1,000 moles, and a kilomole of ammonia weighs 17 kg.

The point is that equal masses are not equal counts. A tonne of ammonia holds 58.7 kmol of molecules (calculated); a tonne of urea holds only 16.7 kmol, because each urea molecule weighs 60 against ammonia's 17. Reactions go by counts, so every plant calculation begins by converting tonnes into kilomoles. Mass is conserved overall, yet the mass of one named substance is not: burn 16 kg of methane (1 kmol) and the 1 kmol of carbon dioxide formed weighs 44 kg, because it has borrowed oxygen from the air. Plant engineers therefore keep two ledgers, one in kilograms and one in kilomoles.

The table tests the idea on a block of iron. From density and atomic mass it finds the number of atoms and the room each takes. The spacing agrees with the value measured by X-ray diffraction (see the science node X-ray diffraction by crystals).

Data Estimate 1: how many atoms are in one cubic centimetre of iron?
StepWorkingResult
Mass of the cubedensity 7.87 g per cm3 x 1 cm37.87 g
Moles of iron7.87 g / 55.85 g per mol0.141 mol
Atoms0.141 x 6.02 x 10^238.5 x 10^22
Room per atom1 cm3 / 8.5 x 10^221.2 x 10^-23 cm3
Spacing, if each atom sits in a cubecube root of 1.2 x 10^-23 cm32.3 x 10^-8 cm = 0.23 nm
Checknearest-neighbour distance in iron, measured, about 0.25 nmwithin 10 per cent

Density and atomic mass are standard reference values. The cube model slightly understates the spacing because real atoms pack in a body-centred pattern. Values in the right-hand column are calculated from the inputs shown.

Source: Kosky et al., Exploring Engineering (Academic Press, 2013), ch. 6, 'Chemical Engineering' (mole and kilomole as the engineer's counting unit; idea source only, the example is the author's own)
  • Kosky et al., Exploring Engineering (Academic Press, 2013) · ch. 6, 'Chemical Engineering'; ch. 11, 'Materials Engineering' (idea source only; all wording, numbers and examples are the author's own)
  • Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. I (Caltech online edition) · ch. 1, 'Atoms in Motion', https://www.feynmanlectures.caltech.edu/I_01.html

1.2 Four kinds of bond, metallic, ionic, covalent and molecular, decide melting point, conduction and brittleness

A bond is nothing mysterious. Nuclei and electrons pull and push on one another, and a group of atoms comes to rest in whatever arrangement leaves it with the least energy. To part the atoms again, that energy has to be paid back; the bill is the bond energy. How the electrons are shared sorts almost every material into one of four families, and each family has a recognisable personality.

In a metal, the outer electrons leave their atoms and move freely through the lattice, and the positive ions sit in this moving cloud. The cloud conducts electricity and heat and does not mind if the ions shift. In an ionic solid such as common salt, one atom hands an electron to another, and the oppositely charged ions stack in alternating order. The attraction is strong, so salt melts at 801 degrees C and alumina at 2,072 degrees C, but the pattern depends on plus meeting minus, which matters for brittleness below. In a covalent solid, neighbouring atoms share electron pairs along fixed directions, as in diamond and in the silicon-oxygen network of glass and sand. The bonds are strong and rigid, and must be broken, not slid. Finally, in a molecular solid such as ice, wax or a plastic, the atoms inside each molecule are bound firmly but the molecules cling to each other only by weak attractions. A little heat breaks those, so they melt at low temperatures.

The table lists typical figures. Melting point roughly follows the weakest bond that holds the solid together, because heat must shake the atoms hard enough to loosen it (see Heat and thermodynamics). Conduction needs mobile charges, and only metals have them in a solid.

The trade-off: metals give toughness and conduction but corrode and soften early; ceramics survive heat and chemicals but crack; plastics are light and easy to form but weak and heat-limited.

Data The four bond families and what they give
BondExampleRough bond energyMelting pointBehaviour
MetallicIron, copper, aluminiumabout 300 to 450 kJ per mol of atomsIron 1,538 degrees CBends, conducts, shines, tough
IonicCommon salt, alumina (Al2O3)about 790 kJ per mol for salt (lattice); many times more for alumina, whose ions carry larger chargesSalt 801 degrees C; alumina 2,072 degrees CHard, brittle, insulating as a solid, dissolves or conducts when molten
Covalent networkDiamond, silica (quartz, glass)about 350 kJ per mol per C-C bond; stronger for Si-OQuartz about 1,700 degrees CVery hard, rigid, brittle, insulating
MolecularIce, wax, polyethylene chainsabout 1 to 40 kJ per mol between moleculesIce 0 degrees C; polyethylene about 130 degrees CSoft, low melting, light, insulating

Values are rounded reference figures; the bond energy that matters is the weakest link that holds the solid together.

Source: Bloomfield, How Things Work (Wiley, 2015), ch. 7, 'Heat and Phase Transitions' (chemical bonds and phase change as idea source; table is the author's own)
  • Bloomfield, How Things Work (Wiley, 2015) · ch. 7, 'Heat and Phase Transitions' (idea source only; all wording, numbers and examples are the author's own)
  • Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. III (Caltech online edition) · ch. 10, 'Other Two-State Systems', https://www.feynmanlectures.caltech.edu/III_10.html (the covalent bond as shared electrons)

1.3 Metals bend because planes of atoms can slip a row at a time, and ceramics shatter because slip is blocked

Dragging a heavy rug is hard; pushing a ruck along it moves the whole rug with little effort. A metal crystal deforms the same way. A row of atoms is displaced one step, the displacement travels along a line called a dislocation (see the science node Dislocations in crystals), and every atom ends up in a new place without all the bonds being cut at once. In a metal the sea of shared electrons holds the lattice together wherever the ions end up, so slipping costs little and a bar bends instead of breaking. That gives the warning that the structures module (Structures and materials) called ductility.

In an ionic crystal the same slip fails. Move one layer by half a spacing and plus ions face plus ions; they repel, and the crystal parts along a crack. In a covalent network each bond points in a fixed direction, so the only way to move an atom is to snap its bonds. Neither gives a warning, and a flaw grows as a crack (see Fracture mechanics). A floor tile is strong under squeeze, poor under pull and unforgiving.

Measured strength falls far short of what the bonds could bear, and dislocations are again the cause. A rough rule puts the ideal strength of a crystal near one tenth of its stiffness. For steel, with a stiffness of 200 GPa, that is 20 GPa, yet a Fe 500 rebar yields at 500 MPa, forty times lower. Engineers therefore raise strength by getting in the way of dislocations: dissolving carbon or alloy atoms in the lattice, making grains small so that lines meet boundaries, and bending the metal so that dislocations tangle (work hardening). Each gain costs ductility.

  • Kosky et al., Exploring Engineering (Academic Press, 2013) · ch. 11, 'Materials Engineering' (idea source only; all wording, numbers and examples are the author's own)
  • Feynman, Leighton and Sands, The Feynman Lectures on Physics, vol. II (Caltech online edition) · ch. 30, 'The Internal Geometry of Crystals', https://www.feynmanlectures.caltech.edu/II_30.html

1.4 A polymer is a very long covalent chain held to its neighbours by weak bonds, so plastics soften where metals barely warm

A polyethylene bag, a PET bottle and a nylon rope all share one idea: take a small molecule, a monomer, and join thousands of them end to end. Each chain is stitched together by covalent bonds, so pulling one apart is hard; neighbouring chains, though, only stick to each other weakly. Almost everything about a plastic follows from that mismatch.

A quick estimate shows the shape. High-density polyethylene often has a molar mass near 100,000 g per mol. One ethylene unit weighs 28 g per mol, so a chain holds about 3,600 units, or about 7,100 carbon atoms. Each carbon adds about 0.127 nm along a stretched zigzag, so the chain is roughly 0.9 micrometres long and half a nanometre thick: like a noodle 1 mm wide and almost 2 m long. Such strands tangle like cooked noodles, and the tangles add strength.

Three families follow. Thermoplastics (polyethylene, PET, nylon) are separate chains. Heat gives them the energy to slide, so they melt, can be moulded again and recycled. Thermosets, such as Bakelite (phenolic resin), are cross-linked into one network when they are made, so they char instead of melting and cannot be remoulded. Elastomers are lightly cross-linked, with a few sulphur bridges in the case of Vulcanisation of rubber, so the chains uncoil under load and spring back.

Processing can add strength. A PET bottle is blown from a warm tube that is stretched in two directions, which lines up the chains and also makes it clear and tough. The cost shows in heat: PET softens at about 70 to 80 degrees C, so a bottle left in a hot car can warp. See also Macromolecules (polymer theory) and the product PET bottle; Part 5 shows how chains are made.

  • Kosky et al., Exploring Engineering (Academic Press, 2013) · ch. 11, 'Materials Engineering' (idea source only; all wording, numbers and examples are the author's own)
  • Bloomfield, How Things Work (Wiley, 2015) · ch. 7, 'Heat and Phase Transitions' (idea source only; all wording, numbers and examples are the author's own)

See it in the table

H₂O WaterSt SteelSi SiliconNaCl SaltO2 OxygenCO2 Carbon dioxideNH3 AmmoniaUr UreaC2H4 EthyleneHDPE High-density polyethyleneEl Electricity

Check your understanding

A tonne of ammonia and a tonne of urea are compared. Which statement is right?

A kilomole of ammonia weighs 17 kg and a kilomole of urea 60 kg. A tonne is therefore 58.7 kmol of ammonia and 16.7 kmol of urea.

Why does a salt crystal crack when sheared, while an iron bar bends?

In ionic solids slip brings like charges together and they repel, so the crystal parts. In a metal the electron sea holds the ions wherever they end up.

What gives a plastic its low softening temperature compared with a metal?

Heat only has to overcome the weak attractions between chains. The covalent backbone stays intact until much higher temperatures.
← Module contentsMark read · Part 2: Reactions: energy, rate and catalysts →