Material Insights · Understanding the Material World

Chemical reactions: energy, rates, acids and bases, oxidation

Every reaction rearranges atoms, so it can be balanced, weighed and counted in moles. This module explains the energy of bonds and barriers, what sets the speed and the stopping point of a reaction, how the movement of electrons drives rust, batteries, fuel cells and fire, and how acids, bases and pH work from beaker to rain and ocean.

All courses / Understanding Science / Module 11

Chemical reactions: energy, rates, acids and bases, oxidation

Every reaction rearranges atoms, so it can be balanced, weighed and counted in moles. This module explains the energy of bonds and barriers, what sets the speed and the stopping point of a reaction, how the movement of electrons drives rust, batteries, fuel cells and fire, and how acids, bases and pH work from beaker to rain and ocean.

6 parts · 21 sections · about 80 minutes · 0 of 6 parts read

By the end you will be able to

  • Balance a chemical equation and use mole ratios to work out how much of each substance a reaction needs and makes.
  • Use bond energies to estimate whether a reaction gives out or takes in heat, and explain why a downhill reaction still needs a push.
  • Explain how temperature, concentration, surface area and catalysts change a reaction's speed, and use Le Chatelier's rule to predict a shift in equilibrium.
  • Identify oxidation and reduction as loss and gain of electrons, and apply them to corrosion, batteries and fuel cells.
  • Compare fuels by energy and by the carbon dioxide released for each unit of heat.
  • Define acids and bases by proton transfer, read pH as a logarithm, and explain how buffers, acid rain and ocean acidification arise.

Contents

  1. Part 1 Writing a reaction down and counting what goes in and out

    A chemical reaction rearranges atoms, so it can be written as a ledger and weighed on a balance. This part shows how to balance an equation, why the total mass cannot change, how the mole turns grams into counts of atoms, and how to read an equation as a recipe that says how much of each substance is needed.

    • An equation is a ledger of atoms, and balancing it means changing how many molecules take part, never what the molecules are
    • Mass is conserved because the atoms are only rearranged, and weighing everything is what proved it
    • The mole counts particles by weighing, because a mole of any substance weighs its formula mass in grams
    • Stoichiometry reads the coefficients as mole ratios, and the scarcest reactant sets how much product can form
  2. Part 2 Energy in reactions: bonds, barriers and fuels

    Some reactions warm their surroundings and some cool them. This part explains why, using the energy of bonds, shows why a fuel can sit in air for years and then burn at a spark, and ranks fuels and foods by the energy in each kilogram. It also meets the surprise that a reaction can run uphill in heat and still go.

    • The heat of a reaction is the energy spent breaking the old bonds minus the energy returned as new bonds form
    • A downhill reaction still needs a push over an energy barrier, which is why fuel can sit in air for years
    • Fuels and foods differ widely in the energy in each kilogram, and a reaction need not give out heat to go
  3. Part 3 How fast and how far: rates, catalysts and equilibrium

    Whether a reaction can happen and how quickly it does are separate questions. This part explains what sets the speed: temperature, concentration, surface area and catalysts. It then shows why many reactions stop short of completion, and how Le Chatelier's rule predicts what a push on a balanced system will do.

    • Reactions speed up steeply with temperature, because heat raises the share of collisions that carry enough energy to cross the barrier
    • More reactant per volume and more exposed surface mean more collisions, which is why dust can burn in an instant and a log cannot
    • A catalyst lowers the barrier and is not used up, and two cases show its reach: an enzyme in a potato and chlorine in the stratosphere
    • Many reactions run in both directions until the forward and backward rates match, and Le Chatelier's rule predicts how a push moves that balance
  4. Part 4 Oxidation and reduction: electrons on the move

    A rusting gate, a phone battery, a hydrogen fuel cell and a gas flame look unrelated, yet in all four electrons pass from one substance to another. This part defines oxidation and reduction as that transfer, building on the energy of Part 2,, then follows it through corrosion, batteries and fuel cells, and combustion, ending with the carbon dioxide each fuel yields for the energy it gives.

    • Oxidation is the loss of electrons and reduction is the gain, and neither can happen without the other
    • Rust is a small electrochemical cell on the surface of iron, which water and salt speed up and coatings or alloying can slow
    • A battery splits a redox reaction in two and sends the electrons round a wire, and a fuel cell does the same while fuel is fed in
    • Combustion is a self-sustaining fast oxidation, and fuels differ in how much carbon dioxide they release for the heat they give
  5. Part 5 Acids and bases: protons, pH and buffers

    Sour lemon, slippery soap and the sting of a drain cleaner are the senses meeting two families of chemicals. This part defines acids and bases by what they do with protons, puts the pH scale on a logarithmic footing, and shows how neutralisation and buffers work, from a beaker to the blood.

    • An acid gives away a proton and a base takes one, a view that widened the older definition tied to water
    • pH is a logarithm of the hydrogen-ion concentration, so each step on the scale is a factor of ten
    • An acid and a base cancel to a salt and water, and a buffer resists changes in pH because it holds a weak acid and its partner base
  6. Part 6 Acids in the air and the sea: acid rain and ocean acidification

    The same chemistry as in a beaker runs on the scale of the sky and the ocean. This part shows why clean rain is already slightly acidic, how sulphur and nitrogen from the burning of Part 4 lower it further, what the Indian record shows, and how carbon dioxide dissolving in the sea changes the pH and the carbonate that shell-builders use.

    • Clean rain is already mildly acidic at about pH 5.6, and sulphur and nitrogen oxides from burning push it lower
    • Indian rain shows falling pH in places, yet alkaline dust often neutralises it, and the answer to the source lies in removing sulphur
    • The sea has absorbed a quarter to a third of our carbon dioxide, and the chemistry of that uptake lowers pH and removes carbonate that shell-builders need
  7. Wrap-up Key terms, try it in the table, final quiz, sources
Start: Part 1, Writing a reaction down and counting what goes in and out →