Chemical reactions: energy, rates, acids and bases, oxidation: Acids and bases: protons, pH and buffers
All courses / Understanding Science / Module 11: Chemical reactions: energy, rates, acids and bases, oxidation Part 5 of 6Acids and bases: protons, pH and buffers
Sour lemon, slippery soap and the sting of a drain cleaner are the senses meeting two families of chemicals. This part defines acids and bases by what they do with protons, puts the pH scale on a logarithmic footing, and shows how neutralisation and buffers work, from a beaker to the blood.
5.1 An acid gives away a proton and a base takes one, a view that widened the older definition tied to water
Lemon, tamarind and vinegar taste sour. Soap and the white paste from wet ash feel slippery. Early chemists sorted substances into the two families by such tests and by their effect on plant dyes. What the members share was a later question.
Svante Arrhenius answered in the 1880s: an acid is a substance that releases hydrogen ions, H+, in water, and a base releases hydroxide ions, OH-. Hydrochloric acid and caustic soda fit well. The definition fails for ammonia, which has no OH in its formula yet behaves as a base, and for reactions outside water.
In 1923 Johannes Brønsted and Thomas Lowry, working independently, gave a wider view. An acid donates a proton and a base accepts one. A hydrogen ion is a bare proton, far too reactive to float free, so in water it attaches to a water molecule as H3O+, the hydronium ion. HCl + H2O → H3O+ + Cl- shows the water acting as a base. NH3 + H2O ⇌ NH4+ + OH- shows it acting as an acid. Water can be either, which is why it is called amphoteric. Each acid leaves behind a conjugate base, the particle that could take the proton back.
Strength is a separate matter from concentration. A strong acid passes its proton to water almost completely. A weak acid does so for only a small fraction of its molecules. Vinegar, about 0.83 mol per litre of acetic acid, has only about half of one per cent of its molecules as ions.
| Substance | Formula | Where met | Strength |
|---|---|---|---|
| Hydrochloric acid | HCl | Toilet cleaner, stomach juice, plant cleaning | Strong acid |
| Acetic acid | CH3COOH | Vinegar | Weak acid |
| Citric acid | C6H8O7 | Lemon, tamarind, effervescent salts | Weak acid |
| Carbonic acid | H2CO3 | Soda water, rain, sea | Weak acid |
| Caustic soda | NaOH | Drain cleaner, soap making | Strong base |
| Ammonia | NH3 | Floor cleaner, fertiliser | Weak base |
| Baking soda | NaHCO3 | Kitchen, antacid tablets | Weak base |
| Milk of magnesia | Mg(OH)2 | Antacid; sparingly soluble | Weak base |
See Understanding Chemicals for Sulphuric acid, Nitric acid, Citric acid and Caustic soda.
Source: Rounded standard reference values for molar masses, bond energies, enthalpies of formation, heating values, activation energies and equilibrium constants, as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook, values quoted to two or three figures as round numbers for estimates; bond energies, heating values and activation energies spot-checked in 2026 against the sources listed beside them- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 13, 'Chemical Reactions'
- Rounded standard reference values for molar masses, bond energies, enthalpies of formation, heating values, activation energies and equilibrium constants, as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook · values quoted to two or three figures as round numbers for estimates; bond energies, heating values and activation energies spot-checked in 2026 against the sources listed beside them
5.2 pH is a logarithm of the hydrogen-ion concentration, so each step on the scale is a factor of ten
Pure water is not quite pure in the sense of containing only H2O. A tiny share of water molecules passes protons to others, and at 25 degrees C there are 10^-7 mol per litre of H+ and the same of OH-. Their product is always 10^-14 at that temperature, which means that adding acid raises H+ and lowers OH-.
The concentrations of H+ range from about 1 mol per litre in a strong acid to 10^-14 in a strong base, a span of fourteen powers of ten. Søren Sørensen, working at the Carlsberg brewery laboratories in Copenhagen where acidity affected enzymes, proposed in 1909 a compact way to write them. The pH is minus the base-10 logarithm of the H+ concentration in mol per litre: pH = minus log10[H+]. Pure water has pH 7.
Because the scale is logarithmic, one pH unit is a factor of ten in H+, and the numbers add by multiplication. A drop of 1 unit means ten times the H+, a drop of 3 means a thousand. Vinegar at pH 2.4 has about 1,600 times the H+ concentration of rain at pH 5.6 (10^3.2 = 1,585). The scale is a convenience, not a limit; strong acids can have pH below zero.
To measure it, chemists use indicators, dyes that change colour with H+, such as litmus or the juice of red cabbage, or a glass electrode that produces a voltage of about 59 mV per pH unit. Turmeric turns from yellow to red-brown in soap, which is why a stain from curry reddens in the wash.
| Material | Typical pH | H+ in mol per litre | Times more H+ than pure water |
|---|---|---|---|
| Lemon juice | about 2 | 10^-2 | 100,000 |
| Vinegar | about 2.4 | 4 x 10^-3 | about 40,000 |
| Black coffee | about 5 | 10^-5 | about 100 |
| Clean rain | about 5.6 | 2.5 x 10^-6 | about 25 |
| Pure water at 25 degrees C | 7 | 10^-7 | 1 |
| Sea water | about 8.1 | 8 x 10^-9 | about 0.08 |
| Lime water (saturated calcium hydroxide) | about 12.4 | 4 x 10^-13 | about 0.000004 |
Typical values; real samples vary. Vinegar of 0.83 mol per litre acetic acid: [H+] = square root of (1.8 x 10^-5 x 0.83) = 3.9 x 10^-3, pH 2.4.
Source: IUPAC, Chemistry International 32(2), 2010, A century of pH measurement, https://publications.iupac.org/ci/2010/3202/1_mfcamoes.html (Sorensen introduced the pH scale in 1909 at the Carlsberg laboratories in Copenhagen as a simple way of expressing hydrogen ion concentration)- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 13, 'Chemical Reactions'
- IUPAC, Chemistry International 32(2), 2010, A century of pH measurement · web
5.3 An acid and a base cancel to a salt and water, and a buffer resists changes in pH because it holds a weak acid and its partner base
When an acid and a base are mixed, the protons go to the hydroxide ions and form water: H+ + OH- → H2O. What remains in solution is a salt, the ionic compound made from the other two ions. Hydrochloric acid with caustic soda leaves sodium chloride, ordinary table salt. The reaction gives out about 57 kJ per mole of water formed. Antacid tablets, a dab of lime on an acidic patch of soil, and soaps made from fats and caustic soda all use the idea.
The table works a simple case. A beaker of 100 mL of 0.05 mol per litre hydrochloric acid holds 5 mmol of H+. Magnesium hydroxide, Mg(OH)2, supplies two hydroxides per formula, so 2.5 mmol, or 0.146 g, neutralises it.
A buffer solves a different problem, keeping pH steady when acid or base is added. It contains a weak acid and its conjugate base together. Added acid is soaked up by the base, and added base by the acid. The Henderson-Hasselbalch equation, pH = pKa + log10(base / acid), shows that pH depends only on the ratio, so it stays near the pKa. The blood of a healthy person is held between 7.35 and 7.45 largely by carbonic acid and bicarbonate (pKa about 6.1). A ratio of 20 parts bicarbonate to 1 of acid gives 6.1 + log10 20 = 7.4. The sea has a buffer of its own, built from carbonate, which Part 6 uses.
| Liquid | Before | After | Working |
|---|---|---|---|
| Pure water | pH 7.00 | pH 3.00 | [H+] = 10^-3 mol per litre |
| Buffer: 0.1 M acetic acid + 0.1 M acetate | pH 4.76 | pH 4.75 | acetate 0.099, acid 0.101; pH = 4.76 + log10(0.099 / 0.101) |
| Neutralising 100 mL of 0.05 M HCl | 5 mmol H+ | none left | Mg(OH)2 + 2 HCl → MgCl2 + 2 H2O; 2.5 mmol x 58.3 g per mol = 0.146 g |
Blood buffer ratio from pKa 6.1 and pH 7.4: log10 ratio = 1.3, so ratio about 20. This is chemistry, not a guide to health.
Source: Rounded standard reference values for molar masses, bond energies, enthalpies of formation, heating values, activation energies and equilibrium constants, as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook, values quoted to two or three figures as round numbers for estimates; bond energies, heating values and activation energies spot-checked in 2026 against the sources listed beside them- Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 13, 'Chemical Reactions'
- Rounded standard reference values for molar masses, bond energies, enthalpies of formation, heating values, activation energies and equilibrium constants, as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook · values quoted to two or three figures as round numbers for estimates; bond energies, heating values and activation energies spot-checked in 2026 against the sources listed beside them
- Indiana University, Human Physiology (open textbook), acid-base balance · web
See it in the table
H₂O WaterMg MagnesiumNaCl SaltCaO LimeHCl Hydrochloric acidNaOH Caustic sodaH2 HydrogenNH3 AmmoniaAcOH Acetic acidDye DyesCheck your understanding
Which statement fits the Brønsted-Lowry view of NH3 + H2O <-> NH4+ + OH-?
Ammonia takes a proton from water to become NH4+, so it acts as a base even though it has no OH in its formula, which the Arrhenius view could not explain.Compared with a sample at pH 5, a sample at pH 2 has how much more hydrogen ion?
Each pH unit is a factor of 10, so three units is 10 x 10 x 10 = 1,000.Why does an acetic acid and acetate mixture barely change pH when a little acid is added?
A buffer holds a weak acid and its conjugate base together, so added H+ is mopped up by the base. The pH depends on the ratio of the two, which moves only a little.