Material Insights · Understanding the Material World

Chemical reactions: energy, rates, acids and bases, oxidation: Writing a reaction down and counting what goes in and out

All courses / Understanding Science / Module 11: Chemical reactions: energy, rates, acids and bases, oxidation Part 1 of 6

Writing a reaction down and counting what goes in and out

A chemical reaction rearranges atoms, so it can be written as a ledger and weighed on a balance. This part shows how to balance an equation, why the total mass cannot change, how the mole turns grams into counts of atoms, and how to read an equation as a recipe that says how much of each substance is needed.

1.1 An equation is a ledger of atoms, and balancing it means changing how many molecules take part, never what the molecules are

Every reaction in a kitchen, a furnace or a living cell is the same atoms changing partners. A chemical equation records that. The starting substances, the reactants, stand on the left. An arrow that reads 'become' points to the products. The big numbers in front of formulas, the coefficients, say how many molecules of each take part. The small numbers inside a formula, the subscripts, belong to the substance itself: H2O is water, H2O2 is hydrogen peroxide, and an equation may not alter them.

Balancing is counting under one rule: every element must be tallied equally on the two sides. Take cooking gas, mostly propane (C3H8), burning in air. Begin with the atom found in the fewest places. Three carbons on the left need three CO2 on the right. Eight hydrogens need four H2O. The right now holds 6 + 4 = 10 oxygen atoms, and oxygen travels in pairs, so five O2 are needed on the left. The balanced equation is C3H8 + 5 O2 → 3 CO2 + 4 H2O.

Letters in brackets add detail: (s) solid, (l) liquid, (g) gas, (aq) dissolved in water. Most reactions fall into a few patterns, and knowing the pattern helps you guess the products. A more reactive metal pushes a less reactive one out of its salt. An acid meeting a base gives a salt and water.

An equation says what is made and in what proportion. It says nothing about speed, or whether the change will happen at all.

Data Four common patterns, each with a balanced example
PatternBalanced exampleWhat happens
Combination2 Mg + O2 → 2 MgOMagnesium ribbon flares white and joins with oxygen
Decomposition2 NaHCO3 → Na2CO3 + H2O + CO2Baking soda in a hot oven splits into three products
Single displacementFe + CuSO4 → FeSO4 + CuIron takes the place of copper in a blue solution
Double displacementHCl + NaOH → NaCl + H2OPartners swap: acid and base give salt and water

Check the baking soda line: left side has 2 Na, 2 H, 2 C and 6 O; right side has 2 Na, 2 C, 2 H (in the water) and 3 + 1 + 2 = 6 O.

Source: Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013), ch. 13, 'Chemical Reactions'
  • Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 13, 'Chemical Reactions'

1.2 Mass is conserved because the atoms are only rearranged, and weighing everything is what proved it

Module 10 told how Lavoisier's balance overturned the idea that burning releases a fire-substance. The experiment that identified the gas involved ran for twelve days. He kept mercury close to boiling in a sealed volume of air. Red specks of calx spread over the metal, and the air shrank by about a sixth. Heated more strongly on its own, the calx gave back almost the same volume of gas, and the mercury with it. Burning and calcining, he concluded, are combination with this part of the air, which he named oxygen, and his textbook of 1789 made the conservation of mass a working rule of chemistry.

The reason is simple once atoms are accepted. A chemical change moves atoms between partners. It neither makes nor destroys them, and each atom keeps its mass, so the total cannot change. A burning log loses weight because carbon dioxide and water vapour leave as gases. Steel wool gains weight when it burns because oxygen from the air joins it.

The rule holds to far more places than any kitchen balance can read. Reactions do release energy, and energy has a small mass (see module 9, The nucleus). Burning hydrogen gives out 242 kJ per mole of water, which weighs 2.7 x 10^-12 kg, about one part in seven billion of the 18 g involved. No balance can see that.

Data Mass ledger for 10 g of steel wool burnt in air (calculated)
StepWorkingResult
Equation4 Fe + 3 O2 → 2 Fe2O3Ratio 4: 3: 2 by moles
Iron in10 g / 55.8 g per mol0.179 mol
Oxide out0.179 x 2/4 = 0.0896 mol, times 159.7 g per mol14.3 g
Oxygen taken from air0.179 x 3/4 = 0.134 mol, times 32.0 g per mol4.3 g
Check10 g + 4.3 g = 14.3 gMass in equals mass out

Molar masses: Fe 55.8, O 16.0, so Fe2O3 is 159.7 g per mole.

Source: Purdue University, Chemistry Education, Antoine Lavoisier, https://chemed.chem.purdue.edu/genchem/history/lavoisier.html (Lavoisier found that mass is conserved in a chemical reaction because the atoms are only rearranged)

1.3 The mole counts particles by weighing, because a mole of any substance weighs its formula mass in grams

A reaction goes by numbers of molecules, yet a shop or a laboratory has only a balance. The bridge is the mole. Atomic masses are relative: carbon-12 is defined as 12 and an iron atom is about 56, so 12 g of carbon and 56 g of iron hold the same number of atoms. That number is the Avogadro constant, 6.022 x 10^23 per mole. Since 2019 it has been fixed exactly as 6.02214076 x 10^23, and the mole is defined from it.

A grocer sells rice by weight, not by the grain, and the weight stands in for a count. The mole works the same way for atoms. Molar mass in grams per mole comes straight from the periodic table: water, with 2 x 1 + 16, is 18 g per mole; carbon dioxide, 12 + 32, is 44; baking soda, NaHCO3, is 23 + 1 + 12 + 48 = 84.

Equal masses are therefore not equal counts. A gram of hydrogen gas holds about 16 times as many molecules as a gram of oxygen. For gases there is a second shortcut. Avogadro proposed in 1811 that equal volumes of different gases, at the same temperature and pressure, hold equal numbers of molecules. At 25 degrees C and one atmosphere, one mole of any gas fills about 24.5 litres.

Data From grams to moles to particles (calculated)
AmountMolar massMolesParticles or volume
250 g water18 g per mol13.9 mol8.4 x 10^24 molecules
5 g baking soda84 g per mol0.060 mol3.6 x 10^22 units
1 kg propane44.1 g per mol22.7 mol1.4 x 10^25 molecules; 0.56 m3 as gas at 25 degrees C
1 kg carbon dioxide44.0 g per mol22.7 mol0.56 m3 as gas at 25 degrees C

Gas volume taken as 24.5 L per mole at 25 degrees C and one atmosphere. Compare module 10, Matter and bonding, for molarity.

Source: Rounded standard reference values for molar masses, bond energies, enthalpies of formation, heating values, activation energies and equilibrium constants, as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook, values quoted to two or three figures as round numbers for estimates; bond energies, heating values and activation energies spot-checked in 2026 against the sources listed beside them
  • Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 13, 'Chemical Reactions'
  • Rounded standard reference values for molar masses, bond energies, enthalpies of formation, heating values, activation energies and equilibrium constants, as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook · values quoted to two or three figures as round numbers for estimates; bond energies, heating values and activation energies spot-checked in 2026 against the sources listed beside them
  • Science History Institute, Amedeo Avogadro · web

1.4 Stoichiometry reads the coefficients as mole ratios, and the scarcest reactant sets how much product can form

Once you can count by weighing, an equation becomes a recipe. The coefficients give the ratio in moles: for C3H8 + 5 O2 → 3 CO2 + 4 H2O, one mole of propane needs five of oxygen and yields three of carbon dioxide. The method has three steps. Convert the known mass to moles, scale by the coefficient ratio, and convert back to mass. This bookkeeping is called stoichiometry.

The table works it for an Indian domestic LPG cylinder, 14.2 kg, treated as pure propane for simplicity. It also shows why a gas stove produces so much water and carbon dioxide: the products weigh more than the fuel, since the oxygen from the air is now inside them. The mass check at the bottom is Lavoisier's rule again.

Real mixtures seldom come in perfect ratio. Think of a cycle workshop with 50 frames and 80 wheels. Each cycle needs one frame and two wheels, so 40 cycles can be built, the wheels run out first, and 10 frames are left over. In a reaction the reactant that runs out first is the limiting reactant, and it caps the product. Actual yields are also lower than the sum predicts, because some of the reactant takes side routes or is lost in handling; the ratio of actual to predicted yield is the percentage yield.

Data One LPG cylinder, 14.2 kg, burnt completely (calculated)
StepWorkingResult
Moles of propane14,200 g / 44.1 g per mol322 mol
Oxygen needed322 x 5 = 1,610 mol, times 32.0 g per mol51.5 kg
Carbon dioxide made322 x 3 = 966 mol, times 44.0 g per mol42.5 kg
Water made322 x 4 = 1,288 mol, times 18.0 g per mol23.2 kg
Mass check14.2 + 51.5 = 65.7 kg; 42.5 + 23.2 = 65.7 kgBalanced
Air needed51.5 kg oxygen at 23 per cent of air by massabout 220 kg, or about 185 m3
Heat released322 mol x about 2,220 kJ per mol (higher heating value, water condensed)about 715 MJ

Domestic cylinders hold a propane and butane mix, so real figures differ a little. Air at about 1.2 kg per m3.

Source: Rounded standard reference values for molar masses, bond energies, enthalpies of formation, heating values, activation energies and equilibrium constants, as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook, values quoted to two or three figures as round numbers for estimates; bond energies, heating values and activation energies spot-checked in 2026 against the sources listed beside them
  • Hewitt, Lyons, Suchocki and Yeh, Conceptual Integrated Science, 2nd edition (Pearson, 2013) · ch. 13, 'Chemical Reactions'
  • Rounded standard reference values for molar masses, bond energies, enthalpies of formation, heating values, activation energies and equilibrium constants, as tabulated in the CRC Handbook of Chemistry and Physics and the NIST Chemistry WebBook · values quoted to two or three figures as round numbers for estimates; bond energies, heating values and activation energies spot-checked in 2026 against the sources listed beside them
  • Engineering ToolBox, Fuels: higher and lower calorific values · web

See it in the table

H₂O WaterSt SteelHg MercuryNaCl SaltRi RiceWl WoolH2O2 Hydrogen peroxideH2 HydrogenO2 OxygenCO2 Carbon dioxide

Check your understanding

Which change correctly balances Fe + O2 -> Fe2O3?

Four iron atoms and six oxygen atoms appear on each side of 4 Fe + 3 O2 -> 2 Fe2O3. The other options either change the formula, which makes a different substance, or leave the counts unequal.

Why does a piece of steel wool weigh more after burning, while a burnt log weighs less?

Mass is conserved overall. The steel wool takes oxygen in as a solid oxide, and the log gives off carbon dioxide and water vapour that float away. The energy-mass change is about one part in 10^10 and cannot be weighed.

A mixture has 3 mol of H2 and 2 mol of O2 for 2 H2 + O2 -> 2 H2O. What is the limiting reactant and how much water forms at most?

Three moles of hydrogen need 1.5 mol of oxygen, and 2 mol are present, so hydrogen runs out first. Each H2 gives one H2O, so the most that can form is 3 mol, and 0.5 mol of oxygen is left over.
← Module contentsMark read · Part 2: Energy in reactions: bonds, barriers and fuels →