Steel reinforcing bar: Interventions
Try this in What if Switch on levers and see what changes in India by 2036.
Interventions
Changes that would cut emissions or material use, by lever and life stage, with effect per unit, readiness, adoption, evidence and who acts
| Lever | Life stage | Change | Effect per unit | Readiness | Adoption | Who acts | Source |
|---|---|---|---|---|---|---|---|
| Change route | Making | Make rebar in scrap or gas-DRI electric furnaces instead of blast furnaces | 1.8 to 2.0 tCO2 per tonne for electric furnace rebar against 2.7 to 3.0 for blast furnace rebar in India [7] | Deployed; about 70% of Indian rebar is already electric furnace | About 70% of India's rebar [7] | Rebar producers, scrap and DRI suppliers | [7] |
| Electrify | Making | Buy captive or group-captive renewable power for electric furnaces | Cuts emissions without changing the process; power costs Rs 5 to 7 per kWh against Rs 8 to 12 from the grid [7] | Deployed | Not stated | Furnace operators, power developers | [7] |
| Efficiency | Making | Efficient furnaces, waste-heat recovery and rolling mill upgrades | 8 to 10% lower energy intensity [7] | Deployed | Not stated | Producers | [7] |
| Circularity | Supply chain | Collect and sort more domestic scrap, with urban scrap hubs, and raise scrap share | Each tonne of scrap saves about 1.1 t of iron ore, 630 kg of coking coal and 55 kg of limestone [7]; a scrap charge of at least 60% is proposed as a green-steel threshold | Piloted and proposed; the 2019 scrap policy has no binding targets | Domestic scrap about 25 Mt in FY24 plus 9 Mt imported [7] | Government, scrap aggregators, producers | [7] |
| Change route | Making | Hydrogen-based direct reduction and carbon capture | Described as critical beyond 2040 for near-zero steel; intensity could fall below 1 tCO2 per tonne by 2030 and near 0.5 by 2035 for TMT rebar [7] | Research and pilot | None found for rebar | Integrated steel makers, hydrogen suppliers | [7] |
| Design | Components design | Specify higher-yield bars (Fe 550D in place of Fe 415) where design allows | About 25% less steel area for the same tensile force, since 415 / 550 = 0.755 (calculated from yield stress; crack width and deflection limits may reduce this) | Deployed; the grades exist in IS 1786 [8] | Not stated | Structural designers, code writers | [8] |
| Substitute | Components design | Use glass-fibre reinforced polymer bars where corrosion governs | Claimed not to corrode, but modulus 6,500 to 8,700 ksi against 29,000 ksi for steel, 1.1% elongation, and tensile strength at bends reduced by 40% [17]; no emissions comparison found | Deployed in niche uses | Not stated | Designers, standards bodies | [17] |
| Business model | Supply chain | Buy certified green rebar with a price premium | Effective green premium of about 3 to 5%, against the 10 to 15% producers often expect [7] | Piloted | Not stated | Developers, public clients, producers | [7] |
as of 2026-11-16
Sources
- The Rebar Opportunity: Decarbonising the Backbone of India's Built Environment RMI India Foundation with BMTPC and Lodha Foundation, 2025
- IS 1786:2008 High strength deformed steel bars and wires for concrete reinforcement (with Amendment 1, 2012) Bureau of Indian Standards, copy on law.resource.org, 2008
- Performance Comparison Steel Rebar vs GFRP in Reinforced Concrete Structures (Faza, Russo and Geber) Transportation Association of Canada (host)