Steel reinforcing bar: Supply chain
Output and value
World output and its value, with year and source
| Measure | Value | Unit | Year | Source |
|---|---|---|---|---|
| World crude steel, all products (rebar is part of it; no opened source gives world rebar output) | 1849 | Mt | 2025 | [2] |
| World crude steel, all products | 1885 | Mt | 2024 | [1] |
| China rebar output (National Bureau of Statistics via SteelOrbis), down 13.6% on 2023 | 195.06 | Mt | 2024 | [19] |
| India crude steel, all products | 152.18 | Mt | 2025 | [9] |
| India sponge iron (DRI) output, the main feed of Indian electric furnaces | 55.76 | Mt | 2025 | [11] |
| India bars and rods consumption (not output), 42% of finished steel | 59 | Mt | 2024 | [7] |
as of 2026-11-16. Years for India are fiscal years ending in March, shown as the later year. No opened source gives the value of world rebar output.
Where it is made
Country shares of world output
| Country | Share | Measure | Year | Source |
|---|---|---|---|---|
| China | 52 | share of world crude steel, all products (960.8 of 1,849 Mt, calculated); rebar share not published | 2025 | [2] |
| India | 8.9 | share of world crude steel, all products (164.9 Mt, calculated) | 2025 | [2] |
| United States of America | 4.4 | share of world crude steel, all products (81.9 Mt, calculated) | 2025 | [2] |
| Japan | 4.4 | share of world crude steel, all products (80.7 Mt, calculated) | 2025 | [2] |
| Russia | 3.7 | share of world crude steel, all products (67.9 Mt, calculated) | 2025 | [2] |
as of 2026-11-16
Main companies
The largest makers and their shares
| Company | Country | Share | Measure | Year | Source |
|---|---|---|---|---|---|
| China Baowu Group | China | 6.7 | share of world crude steel, all products (124.76 of 1,849 Mt, calculated); no opened source ranks rebar makers | 2025 | [2] |
| ArcelorMittal | Luxembourg | 3.4 | share of world crude steel, all products (63.43 Mt, calculated) | 2025 | [2] |
| Tata Steel Group | India | 1.6 | share of world crude steel, all products (30.46 Mt, calculated); Tata Steel's rebar EPD covers its Indian plants | 2025 | [2, 6] |
as of 2026-11-16
Supply chains of the main makers
For the top three to five producing countries and India: share, where inputs and components come from, main makers and how variants differ
| Country | Share | Inputs from | Makers | How variants differ | Year | Source |
|---|---|---|---|---|---|---|
| China | 52 | No opened source gives China's iron ore or scrap sources for rebar | China Baowu Group is the largest steel company (124.76 Mt, 2025) [2] | Rebar output was 195.06 Mt in 2024, down 13.6% [19]; route split not found | 2025 | [2, 19] |
| India | 8.9 | Sponge iron from domestic plants (55.76 Mt in 2024-25) [11]; scrap about 25 Mt domestic plus 9 Mt imported in FY24 [7] | About 70% of rebar from small secondary producers and 30% from integrated plants such as Tata Steel [7] | Crude steel is 43% oxygen furnace, 35% induction furnace and 22% arc furnace (all products) [7] | 2025 | [2, 7, 11] |
| United States of America | 4.4 | Recycled steel scrap, 98% of the charge in the CRSI industry EPD [3] | Commercial Metals Company's Sayreville mill [4] | Scrap-EAF route; rebar EPDs give 652 to 854 kg CO2e per tonne [3, 4] | 2025 | [2, 3, 4] |
as of 2026-11-16
Industries that make it
The industries and kinds of firm that make it
Made by- Integrated steel mills and electric-arc mini-mills 30% share · India Integrated steel plants make about 30% of India's rebar [7]
- Rebar and structural-steel producers 70% share · India Secondary producers with electric and induction furnaces make about 70% of India's rebar [7]
- Ferroalloy and alloying-element suppliers Supply the manganese, silicon and microalloys added at tapping [4]
as of 2026-11-16
Critical inputs
Inputs whose supply is concentrated, listed as critical or under export controls
| Input | Why | Concentration | Year | Source |
|---|---|---|---|---|
| Steel | Scrap supply: India is the second-largest importer of ferrous scrap and over 70% of it comes from 10 countries; domestic scrap is about 25 Mt a year | Over 70% of imported scrap from 10 countries | 2024 | [7] |
| Coking coal | Coal supplies about 75% of the iron and steel sector's energy demand, and the blast furnace route uses about 800 kg of coal per tonne of steel | – | 2020 | [15, 12] |
| Iron ore | The blast furnace route uses about 1,400 kg of iron ore per tonne of steel | – | 2018 | [12] |
as of 2026-11-16
Rules and standards
Labels, efficiency and emission standards, producer responsibility, bans and tariffs
| Rule | Place | Year | What it does | Source |
|---|---|---|---|---|
| Steel and Steel Products (Quality Control) Order, 2024 | India | 2024 | Requires high strength deformed bars and wires to IS 1786:2008 (sizes below 8 mm excepted) to bear the BIS Standard Mark under licence; it supersedes the 2020 order, which already covered these bars [26]. A compliance consultancy gives general implementation as 29 August 2024 [14]. Contraventions are punishable under section 29 of the BIS Act 2016 [26]. By December 2024, 151 Indian Standards were notified under the steel quality control order [10] | [26, 14, 10] |
| IS 1786:2008 High strength deformed steel bars and wires for concrete reinforcement | India | 2008 | Sets grades Fe 415 to Fe 600 with D and S ductility categories, chemistry, mass tolerance and diameters 4 to 50 mm [8] | [8] |
| Steel Scrap Recycling Policy, 2019 | India | 2019 | Promotes scrap use but sets no binding scrap utilisation targets [7] | [7] |
| GST and customs duty on scrap | India | 2025 | Domestic scrap purchases attract 18% GST, while imported scrap faces only nominal customs duties [7] | [7] |
| EU Carbon Border Adjustment Mechanism, iron and steel goods | European Union | 2026 | Counts embedded emissions of imported iron and steel products, including bars and rods, from the definitive period beginning in 2026; generally direct emissions only [18] | [18] |
as of 2026-11-16
India
India's output, trade, makers and rules in a short paragraph
India is the second-largest crude steel producer, at 152.18 Mt in 2024-25 [11, 9]. It used 59 Mt of bars and rods in 2023-24 [7]. About 70% of rebar comes from small producers using electric and induction furnaces, and 30% from integrated plants [7]. Rebar to IS 1786 must carry a BIS licence mark under the 2024 quality control order [14].
as of 2026-11-16
Trade
World exports, the top exporters and importers and India, from UN Comtrade by HS code (worked out by the site)
| Flow | Value | Unit | Volume | Unit | Year | Source |
|---|---|---|---|---|---|---|
| World exports | 10.53 | USD billion | 14,618.6 | thousand tonnes | 2024 | UN Comtrade, HS 7214.20 |
| Average export value (calculated) | 0.72 | USD per kg | – | – | 2024 | UN Comtrade, HS 7214.20 |
| Exporter: Türkiye (19.0% of world exports) | 2 | USD billion | 3424.4 | thousand tonnes | 2024 | UN Comtrade, HS 7214.20 |
| Exporter: China (12.7% of world exports) | 1.33 | USD billion | 2556.4 | thousand tonnes | 2024 | UN Comtrade, HS 7214.20 |
| Exporter: Oman (6.5% of world exports) | 0.68 | USD billion | 1126.5 | thousand tonnes | 2024 | UN Comtrade, HS 7214.20 |
| Exporter: Italy (6.2% of world exports) | 0.65 | USD billion | – | – | 2024 | UN Comtrade, HS 7214.20 |
| Exporter: Egypt (6.0% of world exports) | 0.63 | USD billion | 957.2 | thousand tonnes | 2024 | UN Comtrade, HS 7214.20 |
| India exports (rank 44, 0.3% of world) | 0.03 | USD billion | – | – | 2024 | UN Comtrade, HS 7214.20 |
| India imports (rank 62, 0.4% of world) | 0.04 | USD billion | – | – | 2024 | UN Comtrade, HS 7214.20 |
| Importer: Hong Kong (9.9% of world imports) | 1.02 | USD billion | 1864.4 | thousand tonnes | 2024 | UN Comtrade, HS 7214.20 |
| Importer: United States (5.9% of world imports) | 0.62 | USD billion | 899.5 | thousand tonnes | 2024 | UN Comtrade, HS 7214.20 |
| Importer: Singapore (5.0% of world imports) | 0.52 | USD billion | 962.2 | thousand tonnes | 2024 | UN Comtrade, HS 7214.20 |
Worked out from data
Sources
- World Steel in Figures 2025 World Steel Association, 2025
- World Steel in Figures 2026 World Steel Association, 2026
- Environmental Product Declaration: fabricated steel reinforcing bar (CRSI industry-wide EPD) Concrete Reinforcing Steel Institute; ASTM International programme operator, 2022
- Environmental Product Declaration of Fabricated Concrete Reinforcing Steel, CMC Sayreville (SCS-EPD-05357) SCS Global Services, for Commercial Metals Company, 2016
- EPD S-P-05018: Steel Rebar, Tata Steel Limited International EPD System, 2022
- The Rebar Opportunity: Decarbonising the Backbone of India's Built Environment RMI India Foundation with BMTPC and Lodha Foundation, 2025
- IS 1786:2008 High strength deformed steel bars and wires for concrete reinforcement (with Amendment 1, 2012) Bureau of Indian Standards, copy on law.resource.org, 2008
- An Overview of Steel Sector (file labelled November 2026; data to November 2025) Ministry of Steel, Government of India
- An Overview of Steel Sector (file labelled 20 December 2024) Ministry of Steel, Government of India
- Development of Indian Steel Sector since 2014-15 Ministry of Steel, Government of India
- Fact sheet: Steel and raw materials World Steel Association (copy hosted by Australian Steel Institute), 2018
- BIS QCO for high strength deformed steel bars and wires for concrete reinforcement Aleph India (compliance consultancy)
- Iron and Steel Technology Roadmap International Energy Agency, 2020
- EC publishes sector-specific CBAM guidance for iron and steel to help non-EU operators Eurometal, 2026
- China's rebar output down 13.6 percent in 2024 SteelOrbis, 2025
- Steel and Steel Products (Quality Control) Order, 2024 (text of the Order) Legitquest (legal database copy)