Material Insights · Understanding the Material World

Steel reinforcing bar: Bill of materials

About these figures

Which unit, study and year the composition figures describe, and how they vary

Amounts per tonne are worldsteel's raw-material inputs per tonne of crude steel for the integrated and recycled-steel routes [12], scaled by India's ratio of crude to finished steel output (about 1.04, calculated) [9, 11]. Recycled content comes from US and Egyptian EPDs [3, 4, 5]. No opened source gives sponge iron or ferroalloy mass per tonne. Steel billets and welded mesh are not nodes; nor are induction furnaces or ferrous scrap.

as of 2026-11-16

Direct materials

The commodities and chemicals in one unit as bought, with amount, mass share, cost share and recycled content

Variant 1 Blast furnace
MaterialRoleAmount in one unitShare of the unit's massRecycled content
Fe Iron oreStructural1452 kgrange from 1400 kg – –
1400 kg per tonne of crude steel [12], times 1.037 t of crude steel per tonne of finished steel (India 2024-25: 152.18 Mt crude [9] over 146.69 Mt finished [11], all products; calculated). low is the per-crude-steel figure.
Kc Coking coalConsumable830 kgrange from 800 kg – –
800 kg per tonne of crude steel [12], times 1.037 t of crude steel per tonne of finished steel (India 2024-25: 152.18 Mt crude [9] over 146.69 Mt finished [11], all products; calculated). low is the per-crude-steel figure. The source does not split coking from other coal. Each tonne of scrap used saves about 630 kg of coking coal [7]
Stn Crushed stoneConsumable311 kgrange from 300 kg – –
300 kg per tonne of crude steel [12], times 1.037 t of crude steel per tonne of finished steel (India 2024-25: 152.18 Mt crude [9] over 146.69 Mt finished [11], all products; calculated). low is the per-crude-steel figure. Linked to crushed stone as there is no limestone node
St SteelStructural124 kgrange from 120 kg – 12%
120 kg per tonne of crude steel [12], times 1.037 t of crude steel per tonne of finished steel (India 2024-25: 152.18 Mt crude [9] over 146.69 Mt finished [11], all products; calculated). low is the per-crude-steel figure. Indian blast furnace plants charge about 8% scrap [7]
Variant 2 Scrap electric arc
MaterialRoleAmount in one unitShare of the unit's massRecycled content
St SteelStructural913 kgrange from 880 kg – 97%
880 kg per tonne of crude steel [12], times 1.037 t of crude steel per tonne of finished steel (India 2024-25: 152.18 Mt crude [9] over 146.69 Mt finished [11], all products; calculated). low is the per-crude-steel figure. US rebar EPDs give recycled content above 97% [3, 4]. Reinforcing steel is above 75% recycled and mostly above 95% in the US [16]
Stn Crushed stoneConsumable66.4 kgrange from 64 kg – –
64 kg per tonne of crude steel [12], times 1.037 t of crude steel per tonne of finished steel (India 2024-25: 152.18 Mt crude [9] over 146.69 Mt finished [11], all products; calculated). low is the per-crude-steel figure.
Kc Coking coalConsumable16.6 kgrange from 16 kg – –
16 kg per tonne of crude steel [12], times 1.037 t of crude steel per tonne of finished steel (India 2024-25: 152.18 Mt crude [9] over 146.69 Mt finished [11], all products; calculated). low is the per-crude-steel figure.
Variant 3 DRI electric furnace
MaterialRoleAmount in one unitShare of the unit's massRecycled content
St SteelStructuralNot given – 43%
Ezz Steel's DRI-EAF rebar is 43% recycled content, internal and external scrap [5]. Indian electric-furnace rebar uses a scrap charge of about 40 to 80% [7]; the balance is sponge iron. No opened source (worldsteel, Ministry of Steel, BigMint) gives kg of sponge iron per tonne
Variant 4 Not stated
MaterialRoleAmount in one unitShare of the unit's mass
Mn ManganeseFunctionalNot given –
Added as ferroalloy at tapping as a deoxidiser and strengthener [4]; CMC's EPD gives the finished steel as under 2% manganese, an upper bound, not an amount added [4]. No source opened (worldsteel, Indian Bureau of Mines ferroalloy yearbook) gives kg per tonne
Si SiliconFunctionalNot given –
Added as ferroalloy to deoxidise and strengthen the steel [4]; no opened source (worldsteel, Indian Bureau of Mines ferroalloy yearbook) gives the amount per tonne
V VanadiumFunctionalNot given –
Microalloy for higher grades; IS 1786 caps total niobium, vanadium, boron and titanium at 0.30% [8]. The CRSI EPD names vanadium among the largest alloying inputs but gives no amount; no amount per tonne found [3]
Nb NiobiumFunctionalNot given –
Microalloy; CBMM says typically 30 to 50% less alloy by weight is needed with niobium alone for the same strength, a general statement not specific to rebar [23]. No amount per tonne found

Indicative · as of 2026-11-16. Ore, coal, limestone and scrap amounts are worldsteel's inputs per tonne of crude steel converted to a tonne of rebar with India's ratio of crude to finished steel output (all products, 2024-25; calculated). The ratio is national and for all products, so the amounts are indicative. Ferroalloy and sponge iron amounts are not given by any opened source.

Cost breakdown

The share of the unit's cost in each component or stage

PartShare of costVariantYearSource
Energy (roughly one third of total production cost, India)33%– 2025[7]
Higher-grade scrap raises material cost by 10 to 12% (low end of the range, not a share of total cost)– Scrap electric arc2025[7]

as of 2026-11-16

How it is put together

The main steps from parts and materials to the finished unit

StepWhat happensTechnologySource
Make iron or collect scrapOre is reduced to hot metal in a blast furnace or to sponge iron by direct reduction; scrap is sorted for the electric furnaceBlast furnace and cast iron[12, 7]
Melt and refineAn oxygen, arc or induction furnace melts and refines the steel; alloys and fluxes are added during tappingElectric arc furnace[4, 7]
Cast to billetsLiquid steel is cast into billets, the feed that rolling mills buy and sell– [21]
Hot rollingBillets are reheated and rolled in stands into a bar with ribs– [8]
TMT coolingWater partly quenches the bar after the last stand; core heat then tempers the hardened surface– [8]
Certify and fabricateBars carry the BIS mark in India; they are cut and bent to shape before placing in the concrete– [14, 3]

as of 2026-11-16

Technologies used to make it

The technologies used to make it, at which step

Made with 5
  • BF Blast furnace and cast iron Reducing iron ore to hot metal Used in the blast furnace route; Tata Steel's rebar EPD is 100% BF-BOF [6]
  • Cok Coke ironmaking Making coke for the blast furnace Coking coal is the blast furnace's main fuel and reductant [12]
  • BOS Basic oxygen steelmaking Refining hot metal into steel India's crude steel is 43% oxygen-furnace steel (all products) [7]; world 69.4% in 2025 [2]
  • EAF Electric arc furnace Melting scrap and sponge iron India's crude steel is 22% arc furnace (all products) [7]; world 30.3% in 2025 [2]. Induction furnaces, 35% of India's crude steel, have no node [7]
  • DRI Direct reduction of iron Making sponge iron for electric furnaces India made 55.76 Mt of sponge iron in 2024-25 [11]

as of 2026-11-16

Sources

  1. World Steel in Figures 2026 World Steel Association, 2026
  2. Environmental Product Declaration: fabricated steel reinforcing bar (CRSI industry-wide EPD) Concrete Reinforcing Steel Institute; ASTM International programme operator, 2022
  3. Environmental Product Declaration of Fabricated Concrete Reinforcing Steel, CMC Sayreville (SCS-EPD-05357) SCS Global Services, for Commercial Metals Company, 2016
  4. EPD 0038: carbon steel reinforcing bars, DRI route (Ezz Steel) CARES, 2025
  5. EPD S-P-05018: Steel Rebar, Tata Steel Limited International EPD System, 2022
  6. The Rebar Opportunity: Decarbonising the Backbone of India's Built Environment RMI India Foundation with BMTPC and Lodha Foundation, 2025
  7. IS 1786:2008 High strength deformed steel bars and wires for concrete reinforcement (with Amendment 1, 2012) Bureau of Indian Standards, copy on law.resource.org, 2008
  8. An Overview of Steel Sector (file labelled November 2026; data to November 2025) Ministry of Steel, Government of India
  9. Development of Indian Steel Sector since 2014-15 Ministry of Steel, Government of India
  10. Fact sheet: Steel and raw materials World Steel Association (copy hosted by Australian Steel Institute), 2018
  11. BIS QCO for high strength deformed steel bars and wires for concrete reinforcement Aleph India (compliance consultancy)
  12. Green Attributes of Rebar Concrete Reinforcing Steel Institute
  13. [SMM Analysis] India Rebar Market: August to September Rally Loses Momentum in October Shanghai Metals Market, 2026
  14. Cost-efficient Steel Alloy Design with Niobium CBMM, 2018