Material Insights · Understanding the Material World

Steel reinforcing bar: Working

What it is

The product and the job it does, in a short paragraph

Steel reinforcing bar, or rebar, is a hot-rolled steel bar with ribs on its surface that is set inside concrete to take the pulling forces concrete cannot carry [8]. The functional unit is one tonne of bar (HS 7214.20, with coiled rebar under 7213.10). Three production routes are covered: blast furnace and oxygen furnace, scrap in an electric arc furnace, and sponge iron (direct reduced iron, DRI) in an electric or induction furnace. Welded mesh, prestressing strand and stainless bar are left out.

as of 2026-11-16

How it works

How it does its job, step by step in plain words

Iron comes from ore reduced in a blast furnace or from direct reduction, or the charge is mostly scrap [12, 7]. The steel is melted and refined in an oxygen, arc or induction furnace, and alloys and fluxes are added at tapping [4]. It is cast to billets, reheated and rolled into a bar with ribs. In the thermo-mechanical treatment (TMT) process the hot bar is quenched in water after the last rolling stand, which hardens the surface; heat from the core then tempers it, leaving a tough outer layer over a softer core [8]. Set in concrete, the ribs lock the bar into the cement so the two share load. The bar takes the tension and the concrete the compression.

as of 2026-11-16

Key specifications

The numbers that describe it, each with unit, variant, year and source

SpecValueUnitVariantYearSource
Minimum 0.2% proof stress, Fe 500D500N/mm2– 2008[8]
Minimum tensile strength, Fe 500D565N/mm2– 2008[8]
Minimum elongation, Fe 500D16%– 2008[8]
Minimum 0.2% proof stress, Fe 550D550N/mm2– 2008[8]
Minimum 0.2% proof stress, Fe 415415N/mm2– 2008[8]
Maximum carbon, D and S grades (Fe 500D)0.25%– 2008[8]
Nominal diameters in the standard, smallest4mm– 2008[8]
Nominal diameters in the standard, largest50mm– 2008[8]
TMT bar sizes in Tata Steel's EPD, smallest6mmBlast furnace2022[6]
TMT bar sizes in Tata Steel's EPD, largest40mmBlast furnace2022[6]

as of 2026-11-16

Variants

The variants whose make-up or footprint differs a lot, what defines each and its share of units

VariantDefining specYearSource
Blast furnaceIron ore and coking coal reduced in a blast furnace, then refined in an oxygen furnace; Tata Steel's rebar EPD is 100% this route, 2,730 kg CO2e per tonne [6]. Oxygen furnaces make 69.4% of world crude steel (all products, 2025) [2]2025[6, 2]
Scrap electric arcMostly scrap melted in an arc furnace; US rebar is made from 98% recycled steel scrap, 652 to 854 kg CO2e per tonne [3, 4]. Arc furnaces make 30.3% of world crude steel (all products, 2025) [2]2025[3, 4, 2]
DRI electric furnaceSponge iron plus scrap melted in an arc or induction furnace; Ezz Steel's DRI-EAF rebar is 1,930 kg CO2e per tonne [5]. India's electric-furnace rebar is 1.8 to 2.0 tCO2 per tonne and about 70% of Indian rebar comes from the secondary sector [7]2025[5, 7]

as of 2026-11-16. No source gives shares of rebar by variant. In India about 70% of rebar is from the secondary sector (electric and induction furnaces, scrap and sponge iron mixed) and about 30% from integrated plants [7].

Limits

The physical limits set by science and the engineering limits of today's design, with today's value

LimitKindLimitTodayUnitSource
Stiffness (modulus of elasticity) of steelPhysical199,948199,948MPa (29,000 ksi); fixed for all steel grades, so stronger bars stretch more at working load[17]
Highest yield grade in IS 1786 (Fe 600)Engineering600550N/mm2 minimum proof stress, against Fe 550D as the top D grade[8]
Carbon equivalent of the steel, for weldabilityEngineering0.42– % (0.53% when micro-alloy or low-alloy steel is used)[8]

as of 2026-11-16. Carbon equivalent limits are in the notes to clause 4.2 of IS 1786.

Science it relies on

The science principles it works by or is limited by

Relies on Limited by

as of 2026-11-16

Sources

  1. World Steel in Figures 2026 World Steel Association, 2026
  2. Environmental Product Declaration: fabricated steel reinforcing bar (CRSI industry-wide EPD) Concrete Reinforcing Steel Institute; ASTM International programme operator, 2022
  3. Environmental Product Declaration of Fabricated Concrete Reinforcing Steel, CMC Sayreville (SCS-EPD-05357) SCS Global Services, for Commercial Metals Company, 2016
  4. EPD 0038: carbon steel reinforcing bars, DRI route (Ezz Steel) CARES, 2025
  5. EPD S-P-05018: Steel Rebar, Tata Steel Limited International EPD System, 2022
  6. The Rebar Opportunity: Decarbonising the Backbone of India's Built Environment RMI India Foundation with BMTPC and Lodha Foundation, 2025
  7. IS 1786:2008 High strength deformed steel bars and wires for concrete reinforcement (with Amendment 1, 2012) Bureau of Indian Standards, copy on law.resource.org, 2008
  8. Fact sheet: Steel and raw materials World Steel Association (copy hosted by Australian Steel Institute), 2018
  9. Performance Comparison Steel Rebar vs GFRP in Reinforced Concrete Structures (Faza, Russo and Geber) Transportation Association of Canada (host)