Material Insights · Understanding the Material World

Wind turbine tower: Footprint

Raw materials in one unit

Every commodity and chemical inside one unit, traced through its components by the site, with its emission factor and emissions

VariantMaterialAmount (kg)Emission factor (kg CO2e per kg)Emissions (kg CO2e)
TubularSteel351,0001.92673,920

Worked out from data

The site's estimate

Emissions of one unit worked out by the site from its materials and energy, for the world and India, with the share of mass covered by emission factors

VariantStagePlaceEmissions (kg CO2e)Mass covered by factors
TubularMakingWorld1.19 million100%
TubularUseWorld– –
TubularMakingIndia1.19 million100%
TubularUseIndia– –
ConcreteMakingWorld– –
ConcreteUseWorld– –
ConcreteMakingIndia– –
ConcreteUseIndia– –
LatticeMakingWorld– –
LatticeUseWorld– –
LatticeMakingIndia– –
LatticeUseIndia– –

Worked out from data

Energy to make it

Energy used to make one unit, by carrier and stage

Energy to make
  • Ht Heat 7.35 million MJ · Materials Tubular steel Calculated: 351 tonnes of steel times the 2024 global average of 20.95 GJ per tonne of crude steel [16][4], about 7,350 GJ (about 2,040 MWh). The range runs from 3,450 GJ for scrap-based arc furnace steel (9.84 GJ/t) to 8,380 GJ for blast furnace steel (23.88 GJ/t). It covers crude steel only, not rolling, welding or coating, and mixes coal, gas and electricity, so it sits under heat.

Estimate · as of 2026-11-17. No tower-specific energy figure was found in the sources opened.

Emissions by stage

Published life-cycle emissions of one unit in four stages (making, logistics, use, end of life), with their split, place and variant

StageValueRangeUnitVariantPlaceYearSource
Making674,000242,000 to 821,000 kg CO2e per tower, steel only (calculated: 351 tonnes times 1.92 t CO2 per tonne of crude steel, global average; low uses scrap-based arc furnace steel at 0.69, high blast furnace steel at 2.34; rolling, welding and coating not included)kg CO2e per tower, steel only (calculated: 351 tonnes times 1.92 t CO2 per tonne of crude steel, global average; low uses scrap-based arc furnace steel at 0.69, high blast furnace steel at 2.34; rolling, welding and coating not included)Tubular steelWorld2024[16][4]
Making556,000up to 766,000 kg CO2e per 4 MW tower (calculated: the tower's 31% share of the plant's global warming impact of 448 t CO2e per MW, times 4 MW; 766,000 if the share applies to the 618 t CO2e per MW of the manufacture stage)kg CO2e per 4 MW tower (calculated: the tower's 31% share of the plant's global warming impact of 448 t CO2e per MW, times 4 MW; 766,000 if the share applies to the 618 t CO2e per MW of the manufacture stage)Tubular steelWorld2025[1]

Indicative · as of 2026-11-17. The second row cross-checks the first, from the Vestas V163-4.5 MW study at 98 m hub height; the study does not say whether the 31% is a share of the net or the gross impact. Only the making stage could be isolated for a tower. Vestas gives turbine-wide figures of 505 t CO2e per MW for manufacture and an end-of-life credit of -147 t per MW [1], not split by part. A tower has no energy use of its own in operation.

End of life

What happens to a unit when it is thrown away: collection, reuse, recycling and disposal shares, by place

RouteSharePlaceYearSource
Steel recycled, with scrap credited at worldsteel values (modelled scenario)93.2World2025[1]
Steel landfilled (modelled scenario)6.8World2025[1]
Recyclable steel and concrete as a share of the mass of a decommissioned turbine (not a measured recycling rate)90United States of America2025[17]

as of 2026-11-17. Declared model scenarios, not measured collection rates. No figure for India was found.

Recovered as

The commodities and chemicals recovered at end of life, with recovery rates

Recovered as
  • St Steel 93.2% recovered · Recycling Vestas models 93.2% of steel in a turbine as recycled; the DOE-led report says towers, foundations and steel drivetrain parts offer the greatest recycling potential [1][17].

as of 2026-11-17

End of life in India

Collection and recycling in India, including the informal sector

No opened source covers what happens to wind towers at end of life in India, including the scrap trade and any extended producer responsibility. Vestas models 93.2% of turbine steel as recycled and 6.8% as landfilled [1]. A report led by NREL says around 90% of a decommissioned turbine's mass is recyclable steel and concrete, and that towers and foundations offer the greatest potential [17].

as of 2026-11-17

Sources

  1. Life Cycle Assessment of electricity production from an onshore V163-4.5 MW wind plant (version 1.2, 15 January 2025) Vestas Wind Systems A/S, 2025
  2. Technical Documentation, Wind Turbine Generator Systems, GE 158 - 50/60 Hz: Weights and Dimensions (Rev. 03, 2019-05-02) General Electric (copy in Dutch EIA project documents), 2019
  3. Sustainability Indicators Report 2025 (table of CO2 emissions and energy intensity 2022-2024, added February 2026) worldsteel, 2026
  4. DOE says 90% of US wind turbines are recyclable (7 January 2025) Utility Dive, 2025