Chemical equilibrium (Le Chatelier's principle): Technologies
Technologies
The technologies that rely on it, and how each one uses it
Limits 15- BOS Basic oxygen steelmaking How far impurities leave the metal for the slag is set by a balance that shifts with conditions [1], which limits how clean the steel can be made in one blow.
- Bes Bessemer process Blowing leaves oxygen dissolved in the steel in balance with the metal [1], so it has to be removed before the steel is used.
- BF Blast furnace and cast iron The balance between the gases that take oxygen from the ore shifts with temperature [1], which caps how much of their reducing power the furnace can use.
- Cok Coke ironmaking The balance between the furnace gases that reduce the ore depends on temperature [1], which limits how much of the gas's reducing power can be used.
- Ctp Contact process (sulphuric acid) The reaction does not go all the way in one pass because it reaches a balance [1], so plants remove the product and pass the gas again.
- Cz Czochralski crystal growth Impurities share themselves unevenly between the melt and the growing crystal, a balance between two phases [1], so the make-up changes along the crystal.
- H2T Hydrogen and hydrogen carriers Splitting a hydrogen carrier back into hydrogen runs only as far as its balance allows at the chosen temperature [1], which limits how much is recovered for the energy spent.
- HI Energy-intensive industry Ammonia synthesis reaches a balance before all the gas has reacted [1], so plants recycle what is left.
- PtX Power-to-X Making fuels from hydrogen stops at a balance set by temperature and pressure [1], so unreacted gas is recycled.
- Ref Refining and reforming Several refinery reactions stop short at a balance set by temperature and pressure [1], so conditions are chosen to push them towards the product.
Show 5 more
- ISRU In-situ resource utilisation How far each reaction goes at a given temperature is set by its balance [1], so making oxygen and fuel from local materials needs carefully chosen conditions.
- Ny Nylon (polyamide synthesis) The linking reaction gives off water and can run backwards, so water must be removed to shift the balance [1] and grow long chains.
- PC Portland cement Limestone splits into lime and carbon dioxide only when heat drives the balance [1], so much of cement's carbon dioxide comes from the rock itself.
- NH3 Ammonia, methanol and e-fuels Nitrogen and hydrogen only partly turn into ammonia under any given conditions, which is why Haber needed high pressure and a catalyst when he fixed nitrogen from air in 1905.
- Lead-acid battery Discharge and charge run the same reactions in opposite directions, which limits how much of the lead is used.
- Bay Bayer alumina process The ore dissolves in hot liquor and aluminium hydroxide comes back out when it cools, because changing the temperature moves the balance [1].
- CCS Carbon capture and storage The solvent takes up carbon dioxide when cool and gives it back when heated, a balance moved by temperature [1], so it can be used again and again.
- DAC Direct air capture The sorbent holds carbon dioxide when cool and releases it when heated, as warming shifts the balance [1], so the same material works again and again.
- DLE Direct lithium extraction Sorbents take up lithium from brine and give it back in a different solution, because changing the concentrations moves the balance [1].
- TCB Thermochemical biomass conversion Temperature and the amount of air or steam shift where the reactions settle [1], so operators choose conditions to favour the product they want.
- NH3 Ammonia, methanol and e-fuels Making fuels such as ammonia from hydrogen stops at a balance set by temperature and pressure; Le Chatelier saw that low heat and high pressure favour ammonia [1].
- TCS Thermochemical storage Heat drives a reversible reaction one way and the reverse reaction gives the heat back later, as the balance shifts with temperature [1].
- HB Haber-Bosch ammonia synthesis Le Chatelier saw that low heat and high pressure favour ammonia [1], and Haber used high pressure and a catalyst to make it from nitrogen and hydrogen [5].
- Lbl Leblanc soda process Removing a product as it forms pulls a reaction towards completion, as the balance shifts to make up the loss [1].
- Lm Lime burning Limestone gives up carbon dioxide only when heated strongly, a balance moved by temperature [1].
Show 4 more
- Rcy Battery recycling (hydrometallurgical) Recovery steps shift a balance by changing acidity or concentration [1], so one metal dissolves or settles while others do not.
- Slv Solvay soda process A product that settles out of solution is removed from the balance, so the reaction keeps moving forward [1].
- Chl Water chlorination In water, chlorine settles into a balance between forms that shifts with acidity [1], and the balance decides how strongly it disinfects.
- VRF Flow batteries The Nernst equation of 1889 gives an electrode's voltage from the concentrations of the oxidised and reduced forms, which is why the cell voltage shows how full the tanks are.
as of 2026-11-12
Sources
- Henry-Louis Le Chatelier Encyclopaedia Britannica
- Fritz Haber Science History Institute