Material Insights · Understanding the Material World

Matter and bonding: phases, elements, compounds, solutions: Key terms, quiz and sources

All courses / Understanding Science / Module 10: Matter and bonding: phases, elements, compounds, solutions Wrap-up

Matter and bonding: phases, elements, compounds, solutions: review

Key terms

Physical change
A change after which the substance is the same, such as melting, dissolving or boiling.
Chemical change
A change that makes new substances with new properties, such as burning, rusting or souring.
Law of conservation of mass
The total mass of the substances before a reaction equals the total after it; Lavoisier's principle of 1789.
Law of multiple proportions
When two elements form more than one compound, the masses of one that combine with a fixed mass of the other are in small whole-number ratios; Dalton's prediction.
Compound
A substance made of atoms of two or more elements joined in a fixed ratio, with properties unlike those of its elements.
Mixture
Two or more substances together, each keeping its own properties, in any proportion, and separable by physical means.
Solution
A homogeneous mixture in which the solute is spread as separate molecules or ions through the solvent.
Latent heat
The energy taken in or given out in a change of phase at constant temperature, such as 334 kJ per kg to melt ice and 2,257 kJ per kg to boil water.
Density
Mass divided by volume; it rises with heavier atoms and tighter packing.
Valence electrons
The outermost electrons of an atom, which take part in bonding.
Ionic bond
The electrical attraction between positive and negative ions, as in a salt crystal, which is a lattice and not a set of molecules.
Metallic bond
The attraction between positive metal ions and the shared sea of mobile electrons that surrounds them.
Covalent bond
A bond made by two atoms sharing a pair of electrons; two or three shared pairs make a double or triple bond.
Electronegativity
A number, from Pauling's scale, for an atom's pull on the electrons it shares in a bond; fluorine is highest at 3.98.
Polar bond
A covalent bond in which the shared electrons lie nearer one atom, leaving partial charges at the two ends.
VSEPR
A model in which the pairs of valence electrons around an atom repel one another and spread apart, setting the shape of a molecule.
Dipole moment
A measure of the separation of positive and negative charge in a molecule; water has 1.85 debye and carbon dioxide has none.
Dispersion force
A weak attraction between all molecules, from momentary lopsided charge in their electron clouds, stronger in larger molecules.
Hydrogen bond
A strong attraction between a hydrogen atom bonded to N, O or F and a lone pair on a neighbouring molecule, about 20 kJ per mole in water.
Surface tension
The tendency of a liquid's surface to shrink, caused by the inward pull on surface molecules; about 72 mN per metre for water.
Molarity
Concentration in moles of solute per litre of solution.
Solubility
The greatest mass of solute that dissolves in a given amount of solvent at a given temperature, giving a saturated solution.
Micelle
A ball of soap or detergent molecules with their greasy tails inward and charged heads facing the water, which can carry grease away.
Hard water
Water with dissolved calcium and magnesium, which form scum with soap and scale on heating; the BIS acceptable limit is 200 mg per litre as calcium carbonate.

Try it in the table

  • Open the node 'Atomic theory'. Use N = (m / M) x N_A to count the molecules in a 5 g sugar cube (342 g per mole), then check the 6.7 g per 100 mL tea in this module by converting it to molecules per cup.
  • Open 'X-ray diffraction by crystals' and use the Bragg relation with a wavelength of 0.154 nm and a plane spacing of 0.282 nm (the 200 planes of rock salt) to find the reflection angle, then say why the Braggs' pattern ruled out NaCl molecules.
  • Open 'Latent heat'. Work out how much energy melts a 2 kg block of ice and how much boils away 2 kg of water, then check that the second is about 6.8 times the first.
  • Open 'Vapour-liquid equilibrium (Raoult's law)' and 'Gas laws'. Estimate the boiling point of water at 5,000 m, where the pressure is about 54 kPa, using the method in part 2, and say what happens to the time to cook rice there.
  • Open 'Buoyancy (Archimedes' principle)'. A 1 kg gold bar is 52 cm3. Find the upward force when it is fully under water and compare it with its weight. Then do the same for a 1 kg block of ice.
  • Open 'Osmosis' and use the concentration of sea water in this module (about 0.46 mol of NaCl per kg) to explain why water moves into salty water through a membrane. Then open 'Surface chemistry and adsorption' and say why a drop beads on an oily cloth but spreads on a clean one.

Final quiz

What did Lavoisier's sealed-vessel experiments establish?

Weighing everything before and after showed that mass gained by a burning metal was lost from the air, so the total stayed constant.

Water holds 8 g of oxygen per 1 g of hydrogen and hydrogen peroxide holds 16 g. What does the 2: 1 ratio support?

Peroxide has two oxygen atoms for each two hydrogen atoms where water has one, so the oxygen mass per hydrogen doubles. A whole-number ratio is what atoms predict and Dalton foresaw.

Ice at 0 degrees C and water at 0 degrees C have the same temperature. A kilogram of ice becomes water. What happens to the energy supplied (334 kJ)?

Latent heat goes into the potential energy of separation, so the temperature stays still until all the ice has melted.

A 400 cm3 block has a mass of 7.72 kg. Using the density table, what is it most likely to be?

7,720 g in 400 cm3 is 19.3 g per cm3, the density of gold. Aluminium is 2.7, iron 7.9 and ice 0.92.

Potassium (1 valence electron) and sulphur (6) combine. Which statement is correct?

Each potassium loses one electron and sulphur needs two, so two K+ ions balance one S2- ion, and the ions sit in a crystal lattice.

Which bond has the most ionic character?

Ionic character rises with the electronegativity difference, which is 0.35, 1.78, 1.24 and 0 for the four options in turn, so H-F is the most ionic.

Why is water bent and polar while carbon dioxide is straight and nonpolar?

The shape comes from the pair-repulsion rule. A bent molecule has bond arrows that do not cancel, a straight one with equal bonds does.

Why do ethanol and dimethyl ether, with the same atoms, boil at 78 and minus 24 degrees C?

Both have the same molar mass. Only ethanol has an O-H group to form hydrogen bonds, which hold the liquid together up to a much higher temperature.

A 20 L bucket of water holds 3.0 mmol per litre of calcium. About how much sodium stearate (306.5 g per mole) is lost in making scum?

60 mmol of calcium binds 120 mmol of soap, and 120 mmol x 306.5 mg per mmol is about 37 g.

A saturated solution of potassium nitrate at 80 degrees C is cooled to 20 degrees C. What happens?

Solubility of most solids falls with temperature, so the excess comes out as crystals, about 169 - 32 = 137 g per 100 g of water.
Next module: Chemical reactions: energy, rates, acids and bases, oxidation →

Sources for this module