Thermodynamics of ore reduction (Ellingham diagram): Technologies
Technologies
The technologies that rely on it, and how each one uses it
Relied on by 17- BOS Basic oxygen steelmaking Blown oxygen turns silicon, manganese and phosphorus into oxides that pass into the slag, while carbon leaves as gas [3]; the free energy ranking of oxides decides what oxidises first [1].
- Bes Bessemer process Air blown through the iron oxidises impurities that bind oxygen readily [3], and the free energy ranking of their oxides decides which go before the iron [1].
- BF Blast furnace and cast iron Carbon can take oxygen from iron oxide once the furnace is hot enough; in one worked example the reaction turns favourable only above about 1020 K [2].
- Brz Bronze alloying The metals for bronze come from ores whose oxides carbon can reduce in a furnace, which the free energy of the oxides decides [1].
- Cok Coke ironmaking Coke supplies the carbon that takes oxygen from iron oxide at furnace temperatures, as the free energy of the reaction shows [2].
- Sm Copper smelting Iron in the ore oxidises more readily than copper, so it goes to the slag and the copper is kept [3]; the free energy of the oxides sets that order [1].
- Wtz Crucible steel Sealing iron with carbon in a crucible keeps air out, so conditions stay on the reducing side, where free energy favours the metal [1].
- DRI Direct reduction of iron Carbon monoxide and hydrogen from reformed natural gas take oxygen from iron ore in reactions between gas and solid [6], which the free energy balance allows [1].
- EAF Electric arc furnace Oxygen removes elements that bind it more readily than iron does, as the free energy ranking of their oxides predicts [1].
- H2D Hydrogen direct reduction (green steel) Hydrogen can take oxygen from iron oxide; reducing haematite needs at least 54 kg of hydrogen per tonne of iron, and overall, unlike reduction with carbon monoxide, it absorbs heat [6].
Show 7 more
- Fe Iron smelting (bloomery) Carbon from charcoal can take oxygen from iron oxide once the fire is hot enough; in one worked example the reaction turns favourable only above about 1020 K [2].
- Krl Kroll process (titanium) A metal lower in free energy can take another metal's partner away, as magnesium does with titanium [3]; the same kind of diagram can be drawn for chlorides as for oxides [1].
- Lbl Leblanc soda process Its furnace stage uses carbon to take oxygen from a compound at high heat, a reduction whose direction free energy decides [1].
- Cst Metal casting (lost wax) Casting needs metal freed from its ore by reduction, which the free energy of the oxide decides [1].
- OH Open-hearth steelmaking Impurities that bind oxygen more readily than iron are oxidised out of the bath into slag or gas [3], as the free energy ranking of oxides predicts [1].
- Pud Puddling (wrought iron) Oxygen in the furnace removes carbon from the iron as gas, which the free energy ranking of oxides allows [1].
- Steel reinforcing bar Making steel from ore needs carbon or hydrogen to strip the oxygen from iron oxide, which sets the energy floor of the blast furnace and DRI routes.
- HI Energy-intensive industry The energy needed to pull oxygen from a metal oxide is set by its free energy of formation [1], which puts a floor under the energy per tonne of metal.
- Al Hall-Heroult aluminium smelting Metals low on the diagram have oxides that are hard to reduce; reducing alumina with carbon is hard to run and control, so aluminium is made by electrolysis [3].
as of 2026-11-12
Sources
- Ellingham Diagrams (all content) DoITPoMS, University of Cambridge
- Ellingham Diagrams: Reducing agents DoITPoMS, University of Cambridge
- MY2200 course notes: primary metal production (pyrometallurgy and hydrometallurgy) Michigan Technological University, Department of Chemical Engineering (S. K. Kawatra's faculty files)
- Hydrogen Ironmaking: How It Works (Fabrice Patisson and Olivier Mirgaux), Metals 10(7), 922 MDPI, 2020