Heat conduction (Fourier's law): Technologies
Technologies
The technologies that rely on it, and how each one uses it
Limits 27- Bld Energy in buildings Heat leaks through walls, roofs and windows by conduction, so their insulation sets how much heating or cooling a building needs.
- Can Canning Heat must travel to the cold centre of the can, so large cans and thick foods need longer processing to be safe.
- Gl Glassmaking Glass conducts heat poorly, so its surface and core cool at different rates and it must be annealed slowly.
- Pot Fired pottery Heat soaks slowly through a clay wall, so pieces must be dried and fired gently or uneven expansion cracks them.
- Cst Metal casting (lost wax) How fast heat flows out through the mould decides where the metal sets first, and so where shrinkage holes and weak spots form.
- 3DP Additive manufacturing (3D printing) In powder melting, heat must flow away from each melted track before the next, which limits build speed and causes stresses in the part.
- Wld Arc welding Heat flows from the weld pool into the metal around it, changing its structure in a heat-affected zone; metals that conduct heat well, such as aluminium and copper, need more heat to weld.
- AGS Advanced geothermal Heat reaches a closed loop only by slow conduction through solid rock, which caps the power each well can give.
- DHN District heating and cooling networks Heat leaks from the hot pipe through its insulation, as Fourier's equation describes; lowering a network's temperatures from 80/45 °C to 55/25 °C would cut that loss by about 43%.
- HTF Heat-transfer fluids and heat pipes Fourier's theory of heat conduction of 1822 describes the slow flow of heat through solids; a carrier beats it, and a heat pipe can be several thousand times more effective than the best metals.
Show 17 more
- PCM Latent heat and cold storage Waxes and fatty acids conduct heat poorly, so heat moves slowly into and out of the store, the flow Fourier described in 1822.
- SHS Sensible heat storage Heat leaks out of every store through its walls and moves slowly through rock and soil, the flow Fourier described in work completed in 1822; insulation and size set how long a store keeps its heat.
- TCS Thermochemical storage Salt hydrates conduct heat poorly and water vapour moves slowly through their grains, which slows charging and discharging; composites are made to overcome this.
- IM Injection moulding The part can leave the mould only when its heat has flowed into the cold metal, so cooling sets much of the length of each cycle.
- AI accelerator chip Nearly all the electricity a chip uses ends as heat, which must conduct out through the package to a heat sink or liquid.
- Clay brick Heat must soak into thick, dense bricks, so drying and firing take hours to days and set the energy bill.
- Data-centre server Heat has to flow from chips through heat sinks and heat pipes into moving air, which sets how hot a chip may run.
- Electric water heater Heat leaks through the tank wall and insulation, which sets the standing loss.
- Heat pump Heat has to cross the walls of the two heat exchangers, which sets their size and the temperature gap between refrigerant and air or water.
- Industrial boiler Heat must pass through tube walls and scale, which sets the surface area needed for a given output.
- Machine tool Cutting work ends as heat in the chips, tool and machine, and the frame must stay accurate as it warms.
- Power semiconductor module Heat from the chips must conduct through the ceramic and baseplate, which caps the current a module can carry.
- Printed circuit board Heat from current and from soldering must leave through the laminate, which softens above its glass transition temperature.
- Refrigerator Heat leaking through the walls and door gaskets sets how often the compressor must run, which is why foam insulation matters.
- Variable speed drive Switching and conduction losses must flow through the heat sink, which sets how much power a frame can carry.
- Vehicle wiring harness Current heats a wire, and the heat must flow away through the insulation, which must withstand it; this is why wiring near the engine needs heat-resistant compounds.
- QF Quick freezing of food Heat must flow out from the centre of the food to its surface, so thick blocks, poor contact with freezer plates and wrapping all lengthen freezing.
- Pas Passive solar and natural cooling Insulation slows heat flow, while heavy walls and floors take heat in and let it out slowly, smoothing the swing between day and night.
- MB Mud brick Thick earth walls let heat through slowly, which keeps rooms cooler by day and warmer by night in dry climates.
- HX Heat exchangers and pinch integration Heat passes from one fluid to another through a thin metal wall, so a large area and a thin, conductive wall move more heat.
- Rcp Recuperators and regenerators Hot exhaust gives up heat through metal or ceramic walls to the incoming air, at a rate set by the wall area and the temperature difference.
- Eco Boiler heat recovery An economiser passes flue gas over tubes so that its heat conducts through the tube walls into the feed water.
- HRV Building heat recovery A heat recovery unit passes outgoing and incoming air on either side of thin plates, so heat conducts from the warm stream to the cold one.
- CDQ Steel plant energy recovery Recovering heat from hot gases and products means passing it through exchanger walls, whose area and conductivity limit how much is caught.
- Blr Boilers, furnaces and stoves Heat passes from hot gas through metal walls into water or a pot, so the area and cleanliness of those surfaces set efficiency.
- HTF Heat-transfer fluids and heat pipes Heat must conduct through the walls of pipes and heat pipes into and out of the fluid that carries it.
- DHN District heating and cooling networks Hot water pipes lose heat by conduction through their insulation, which sets how far heat can be sent.
Show 17 more
- SHS Sensible heat storage How fast a store of rock, water or concrete can be charged or emptied depends on how quickly heat conducts into and out of it.
- WHU Waste heat for drying, water and food Drying, water heating and food processing with waste heat all depend on moving that heat through the walls of exchangers and dryers into the product.
- Shr Shared and district heat reuse Heat recovered from one site reaches its users through exchanger walls and insulated pipes, so conduction sets both how much is caught and how much leaks on the way.
- SHC Solar heat collectors The absorber plate conducts the heat of sunlight to the fluid tubes, while insulation behind it keeps the heat from leaking away.
- GSH Geothermal direct use and ground-source heat pumps Ground-source loops gather heat that flows slowly by conduction through the soil and rock around the borehole.
- AGS Advanced geothermal Heat reaches the fluid in deep wells by conduction through hot rock, which limits how much can be drawn from each well.
- DC Data centres Heat has to flow from each chip through heat sinks or cold plates into air or water, which sets how densely chips can be packed.
- Pst Pasteurisation Continuous pasteurisers pass milk in thin layers between steel plates so that heat moves in and out within seconds.
- UHT Aseptic packaging (UHT) Food is heated and cooled in thin streams through heat exchangers, so short conduction paths let it reach a high temperature for only a short time.
- QF Quick freezing of food Heat must conduct out from the centre of the food, so thin pieces and very cold surfaces freeze it fast.
- EDM Electrical discharge machining Each spark heats a spot enough to vaporise it; copper electrodes wear less than brass because of their high thermal conductivity and melting point.
- Lin Hot-metal typesetting The Linotype brings its copper matrices into brief contact with a molten but fast-cooling alloy: heat flows quickly into the cooler moulds, so each line sets in moments.
- OH Open-hearth steelmaking The regenerator bricks soak up heat from the exhaust and pass it to the incoming air and gas when the flow is reversed.
- Heat exchanger Heat crosses each thin metal plate by conduction, so thin plates of conductive steel pass heat well.
- Insulating glass unit The still gas in the sealed gap conducts little heat, and argon conducts less than air.
- Mineral wool insulation The mat works by slowing conduction: thin fibres and trapped still air give a low thermal conductivity.
- Plastic foam insulation board Fourier's law sets heat flow as conductivity times temperature difference over thickness, so low-conductivity cells in a thick board cut it.
as of 2026-11-11